Why Is My Arlo Camera Blinking Red?

Because of their feature-rich features, dependability, and simplicity of use, Arlo cameras are a popular choice for home security. But just like any electrical item, they can sometimes have problems that confuse consumers. The red blinking of the camera is one such problem. You probably want to know why your Arlo camera is blinking red and how to fix it if you’ve observed this. This post will explain why your Arlo camera blinking red, look into potential reasons, and offer workable fixes.

What does red light on arlo camera mean

When your Arlo camera’s red-light blinks, it usually means that something isn’t working properly. A red blinking light often indicates that there is a problem with the camera or that it needs to be serviced, in contrast to some indications that might indicate proper functioning. The ensuing are the chief reasons of red light on arlo camera:

1. Low power source

A low battery is one of the most frequent causes of an Arlo camera blinking red light. Arlo cameras, particularly the wireless variants, run on batteries. The camera will blink red to notify you when the battery level falls underneath. The gadget may notify you that it needs a recharge or new batteries in this easy and efficient method.

Solution: Recharging the battery, or getting a new one if it cannot be recharged, is the simplest way to resolve this problem. Frequently, Arlo cameras provide app-based messages when the battery is low; monitoring these signals can help you avoid unplanned downtime.

2. Problems with Connectivity

A possible explanation for your Arlo camera blinking red might be related to connectivity problems. For Arlo cameras to function properly, a steady Wi-Fi connection is necessary. The camera may blink red to show that it is unable to communicate properly if it disconnects from the network or has trouble connecting to the base station.

Solution: Make sure your Wi-Fi network is operating correctly by first verifying it. Testing other devices connected to the same network might help with this. If your WiFi is strong, consider relocating the camera nearer to base station or router to see if that strengthens the signal. Reestablishing the connection might also be aided by start over the camera and network. You might need to reset the camera and resync it with the base station if the issue continues.

3. Problems with Firmware Updates

Arlo regularly upgrades the firmware of its cameras to enhance functionality, introduce new features, and address issues. Your camera may begin to glow red if a firmware upgrade encounters an issue, such as a lost connection or a power outage.

Solution: Initially, see if the arlo camera blinking red occurred while the camera was updating. This may be accomplished via the Arlo app. Give the camera some time to finish upgrading its firmware if it was doing so. Try restarting the camera if it stays in this unusable state. You might need to make a factory reset and then reload the firmware if restarting doesn’t fix the problem.

4. Sync Problems

A red light on arlo camera during Arlo camera setup or resync may be an indication of a sync issue. This often occurs when the camera configuration fails to link with your Wi-Fi network or the base station.

Solution: Make sure the base station is switched on and connected to the router in order to fix sync problems. First, press the camera’s sync button, then the base station’s. Throughout this procedure, make sure the camera is in range of the base station. Try resuming base station and the camera if the arlo camera blinking red persists. Resetting the camera to its factory settings and attempting the sync procedure once again could be necessary as a final option.

5. Problems with Power

The red light on arlo camera might potentially be caused by power problems. A malfunctioning power cord, a loose connection, or a problem with the power outlet might be the cause of this.

Solution: Verify that the camera is correctly plugged in by checking the power connection. Scrutinize power cord for any warnings of impairment. The cable will require to be substituted if it is spoiled. To rule out problems with the power supply, try inserting the camera into a new outlet if the wire is still in place.

6. Alerts for Motion Detection

Arlo camera blinking red may indicate that motion has been detected. This function, which is often included in earlier versions, signals that the camera is on and recording, which is meant to discourage intruders.

Solution: If motion detection is the cause of the red blinking light, you may adjust this option using the Arlo app. If the light is confusing people or isn’t essential, you may decide to turn it off.

7. Camera Issues

Rarely, a hardware issue might be the cause of the red blinking light. This might be the result of internal problems with the circuitry or other parts of the camera.

Solution: It might be time to get in touch with Arlo support if you’ve exhausted all other possible explanations and the camera is still blinking red. Should the camera still be covered by warranty, you may be in line for a replacement. To speed up the process, when you contact support, make sure you have your purchase details and any troubleshooting actions you’ve already completed.

Avoiding Problems Down the Road

Here are some pointers to reduce the likelihood that your Arlo camera may glow red:

• Regularly Check Battery Levels: This will help you prevent low battery problems, particularly with wireless versions. To cut long-term expenses and make sure you always have a backup set charged and available, think about utilizing rechargeable batteries.
• Keep Your Wi-Fi Strong: Make sure your camera is situated within a fair distance of your base station or router. If your camera is situated distant from the router, you may possibly think about utilizing a Wi-Fi extender.
• Maintain Firmware Updating: Make sure to install any available firmware upgrades by periodically checking the Arlo app. During upgrades, make sure your camera is powered on steadily to prevent disruptions.
• Carry Out Routine Maintenance: To make sure everything is in working order, periodically clean the camera’s lens and inspect the camera and its attachments.

Final thoughts

Although arlo camera blinking red might be concerning, diagnosing and fixing the problem is typically simple. The first step in resolving any issue—be it low battery, connection, or a more complicated one like firmware update failures—is to figure out what the red light on arlo camera indicates. You may restore your Arlo camera to normal functionality and carry on enjoying the peace of mind that comes with a dependable home security system by following the troubleshooting procedures mentioned above.