Why Is My Arlo Camera Blinking Orange Light: How To Fix It?

Arlo cameras are known for their dependable performance and ease of use making them a popular choice for home security. One common issue that Arlo users face is that the Arlo Camera Blinking Orange light. If you’ve observed this happening, you’re probably curious about what it signifies and how to repair it.

In this blog article we’ll look at the different reasons your arlo camera blinking orange and provide extensive instructions for troubleshooting and resolving the issue. By the conclusion you’ll have the knowledge to get your camera back to peak performance.

Knowing the Signs of Arlo Camera Lights

Prior to getting into the specifics of the arlo camera blinking orange twice problem it’s important to know what each of the light indicators on your Arlo camera represents. These LED indicators provide information about the camera’s condition and act as a communication tool between you and your device.

Solid Blue: The camera is operational and linked to the base station.
Blue Blinking: The camera and base station are synchronizing.
Amber (orange) blinking: There something wrong and needs to be fixed.
Amber and Blue Blinking Alternatively: This implies that there is a firmware update underway.

Let’s now concentrate on the arlo camera blinking orange which is the main issue that many Arlo customers have.

My Arlo camera is blinking orange light; why is that?

Your arlo camera blinks orange usually signifies one of several problems.

Low Power Source

A low battery is the common reason for an orange blinking light. Your arlo camera blinking orange to let you know when its battery needs to be changed or refilled when it is extremely low.

Problem with Syncing

Your camera may blink orange if it’s having problems syncing with the base station. This may happen if there is interference preventing a proper connection or if the camera is too far away from the base station.

Failed Firmware Update

Your arlo camera blinks orange during a firmware update if the update is unsuccessful.
A bad Wi-Fi connection an intermittent power supply or a software bug could be at blame for this

Issues with Connectivity

Your camera may have lost connection to the base station or Wi-Fi network if arlo camera blinking orange light. This might occur as a result of interference a weak Wi-Fi signal or a camera malfunction.

Hardware Error

The orange light could occasionally point to a more serious hardware issue. This can be the outcome of a manufacturing fault, interior impairment or revelation to harsh weather.

How to Fix arlo camera blinking orange light

After determining the potential reasons let’s investigate potential solutions.

One of the following fixes should enable you to restore normal operation to your Arlo camera depending on the underlying problem.

1. Change the batteries or recharge them

Recharging or replacing the batteries is an easy fix if a low battery is the cause of the arlo camera blinking orange light.

Batteries that are rechargeable: Take the batteries out of the camera and put them in the charger. Place them back into the camera after they have fully charged.
Change Batteries: If the batteries in your camera are not rechargeable change them out for new ones.
Battery condition: The camera should resume normal operation and the orange light should cease flashing after the batteries have been changed or recharged.

2. Get the Camera and Base Station Back in Sync

Try resyncing if your camera is having trouble staying in contact with the base station:

To make sure there is a good signal transfer the camera nearer to the base station.
On base station hold down the sync switch.
After pushing the sync switch on base station quickly press the one on the camera.
When the blue light blinks to show that the sync was successful wait.
If the orange light doesn’t go away think about relocating the base station to a more central area or removing any obstacles that might be interfering with it including walls or other electronics.

3. Look for updates to the firmware

In the event that the orange light indicates a firmware update failure determine whether a manual firmware update is required:

Launch the Arlo app then select your camera preferences.
Authenticate whether there is an accessible apprise for firmware.
Before installing any updates ensure that your camera is entirely charged and associated to a stout WiFi signal.
Restarting the camera and trying the update again might sometimes fix any problems.

4. Boost the connectivity of WiFi

If poor connectivity is the cause boosting your Wi-Fi signal may be beneficial:

Shift the Router: Make sure your Arlo camera and Wi-Fi router are situated as closely as feasible.
Minimize Interference: Switch off or relocate any other gadgets that could be creating interference like baby monitors cordless phones and microwaves.
Employ a Wi-Fi Extender: To strengthen the signal if your camera is far from the router think about utilizing a Wi-Fi extender.

5. Clear the Camera

You may need to return your Arlo camera to its original settings if everything else fails:

Hold down the reset knob of camera
When the LED rapidly blinks orange release the button.
After the reset resynchronize the camera with the base station.
A factory reset should only be used as a last option because it will erase all of the camera’s settings and data.

When to Get Help from Support

It might be time to get in touch with support team if you’ve followed all of the above instructions. After troubleshooting a continuous orange light could point to a more serious problem like a hardware defect that needs to be fixed by a specialist or replaced.

Avoiding Problems Down the Road

In order to reduce the likelihood of running into the arlo camera blinking orange problem again take into account the following precautionary measures:

To prevent low battery problems, check and replace batteries on a regular basis.
Make sure the location of your base station and camera will allow for a steady and robust connection.
To guarantee reliable connectivity keep an eye on the condition of your Wi-Fi network.

Final thoughts

While an arlo camera blinking orange light can be unsettling it typically indicates a problem that can be fixed with some simple troubleshooting. Whether it’s a low battery a syncing issue or a connectivity issue following the above steps should help you identify and swiftly resolve the issue. You can maintain the best possible functioning condition for your Arlo camera and keep your home safe by being proactive and quickly resolving concerns. After all having peace of mind requires a dependable security system and making sure your Arlo camera is operating properly is a critical component of that.